|
Ball Bearing
|
Deep Groove Ball Bearing
|
60 **,618 ** (1008), 619**(1009),62 **, 63 **, 64 **,
160 **(70001 )
|
|
Thrust Ball Bearing
|
511 ** (81) ,512 **(82) ,513 (83) ,514 ** (84) series and Angular Contact Thrust all Bearings like: 5617 ** (1687) ,5691 ** (91681), 5692 ** (91682) series
|
|
|
Angular Contact Ball bearing
|
SN718 **(11068 ) ,70 ** 72 **,73 **, and B (66), C (36), AC (46) series ; otherwise include QJ and QJF series
|
|
|
Roller Bearing
|
Spherical Roller bearing
|
239**, 230**,240**, 231**, 241**, 222**, 232**, 223**, 233**, 213**, 238**, 248**, 249**and special series include 26** i.e 2638 (3738), 2644 (3844) and so on
|
|
Taper Roller Bearing
|
329**(20079),210**(71), 320**(20071),302**(72), 322**(75), 303**(73), 313**(273),323**(76), 3519**(10979), 3529**(20979),3510**(971), 3520**(20971),3511**(10977), 3521**(20977), 3522**(975), 319**(10076),3819**(10779),3829**(20779), 3810**(777,771), 3820**(20771), 3811**(10777,777) for example: 77752, 77788, 77779 and also include Inch series bearings suchas 938/932 single and double row i.e M255410CD etc.
|
|
|
Thrust Roller Bearing
|
292**(90392), 293**(90393),294**(90394),994**(90194), and 9069 series.
|
|
|
Cylindrical Roller Bearing
|
NU10**, NU2**,NU22**, NU3**,NU23**, NU4**, N, NJ ,NUP series as well as NB, NN, NNU series of big bearings, and we also have Split Bearings 412740, 422740 used in cement industry.And FC, FCD series used inSteel Industry.
|
Metric series tapered roller bearings
For medium taper angle bearings and large taper angle bearings of the metric series, the contact angle codes C and D are respectively recorded after the inner diameter code. Ordinary taper angle bearings are not marked with contact angle codes, and medium taper angle bearings are mainly used for pinion shafts of automobile differential devices.
In the high-load capacity HR series, bearings with the basic code marked J, the outer ring width, outer ring raceway small end surface diameter and contact angle are consistent with ISO regulations. Therefore, the inner ring assembly (CONE) and outer ring of the same basic code bearing marked with this code are internationally interchangeable.
Among the tapered roller bearings of the metric series specified by ISO355, there are new sizes that are not based on the 3xx size series used in the past. Some of them are listed in the size table. The width of the outer ring, the diameter of the small end face of the outer ring raceway and the contact angle are consistent with ISO regulations, and the inner ring components and outer ring are internationally interchangeable.
For medium taper angle bearings and large taper angle bearings of the metric series, the contact angle codes C and D are respectively recorded after the inner diameter code. Ordinary taper angle bearings are not marked with contact angle codes, and medium taper angle bearings are mainly used for pinion shafts of automobile differential devices.
In the high-load capacity HR series, bearings with the basic code marked J, the outer ring width, outer ring raceway small end surface diameter and contact angle are consistent with ISO regulations. Therefore, the inner ring assembly (CONE) and outer ring of the same basic code bearing marked with this code are internationally interchangeable.
Among the tapered roller bearings of the metric series specified by ISO355, there are new sizes that are not based on the 3xx size series used in the past. Some of them are listed in the size table. The width of the outer ring, the diameter of the small end face of the outer ring raceway and the contact angle are consistent with ISO regulations, and the inner ring components and outer ring are internationally interchangeable.
Tapping machine bearing have specially designed raceways and asymmetrical rollers. The bearings can accommodate axial loads acting in one direction and simultaneously acting radial loads. The load is transmitted between the raceways via the rollers at an angle to the bearing axis, while the flange guides the rollers.
Tapered roller bearings mainly bear radial and axial combined loads. The bearing capacity depends on the raceway angle of the outer ring. The larger the angle is, the greater the bearing capacity is. This kind of bearing is a separate bearing, which is divided into single row, double row and four row tapered roller bearings according to the number of rows of rolling elements in the bearing. The clearance of single row tapered roller bearing needs to be adjusted by the user during installation; The clearance of double row and four row tapered roller bearings has been given according to the user’s requirements when the product leaves the factory, and it does not need to be adjusted by the user.
Tapping machine bearing Application：
Tapered roller bearings are widely used in machine tool spindles, gear reducers, automotive drive axles, transmissions, rolling mills, mines, metallurgical industries, plastic machinery, household appliances, motors, pumps, machinery and other automotive parts.
Tapping machine bearing Feature:
1. High load carrying capacity
The large number of rollers, which have an optimum conformity with the washer raceways, enables the bearings to accommodate heavy axial and simultaneously acting radial loads.
2. Accommodate misalignment
Tapered roller bearings are self-aligning and can accommodate misalignment .
3. Separable design
Tapered roller bearings are separable, making it possible to mount and dismount the housing washer separately from the shaft washer and roller and cage assembly. In addition this facilitates maintenance inspections.
4. High speed capability
The cage designs and the optimum conformity of the rollers with the washer raceways make the bearings suitable for relatively high speeds.
5. Long service life
The tapered roller profile reduces edge stresses at the roller/raceway contact.
6. Low friction
The optimized roller end / flange contact keeps frictional heat at low level, even at high speeds.
评价
目前还没有评价