|
Ball Bearing
|
Deep Groove Ball Bearing
|
60 **,618 ** (1008), 619**(1009),62 **, 63 **, 64 **,
160 **(70001 )
|
|
Thrust Ball Bearing
|
511 ** (81) ,512 **(82) ,513 (83) ,514 ** (84) series and Angular Contact Thrust all Bearings like: 5617 ** (1687) ,5691 ** (91681), 5692 ** (91682) series
|
|
|
Angular Contact Ball bearing
|
SN718 **(11068 ) ,70 ** 72 **,73 **, and B (66), C (36), AC (46) series ; otherwise include QJ and QJF series
|
|
|
Roller Bearing
|
Spherical Roller bearing
|
239**, 230**,240**, 231**, 241**, 222**, 232**, 223**, 233**, 213**, 238**, 248**, 249**and special series include 26** i.e 2638 (3738), 2644 (3844) and so on
|
|
Taper Roller Bearing
|
329**(20079),210**(71), 320**(20071),302**(72), 322**(75), 303**(73), 313**(273),323**(76), 3519**(10979), 3529**(20979),3510**(971), 3520**(20971),3511**(10977), 3521**(20977), 3522**(975), 319**(10076),3819**(10779),3829**(20779), 3810**(777,771), 3820**(20771), 3811**(10777,777) for example: 77752, 77788, 77779 and also include Inch series bearings suchas 938/932 single and double row i.e M255410CD etc.
|
|
|
Thrust Roller Bearing
|
292**(90392), 293**(90393),294**(90394),994**(90194), and 9069 series.
|
|
|
Cylindrical Roller Bearing
|
NU10**, NU2**,NU22**, NU3**,NU23**, NU4**, N, NJ ,NUP series as well as NB, NN, NNU series of big bearings, and we also have Split Bearings 412740, 422740 used in cement industry.And FC, FCD series used inSteel Industry.
|
Tapered roller bearings can bear radial load and unidirectional axial load. When a load is applied to the bearing, an axial component of force will be generated. Therefore, like angular contact ball bearings, two bearings are generally used oppositely, or they must be used in the form of double-row bearings. In this case, you can adjust the distance between the inner ring or the outer ring to set a proper internal clearance.
The performance of four row tapered roller bearing is basically the same as that of double row tapered roller bearing, but it bears more radial load than double row tapered roller bearing, and its limit speed is slightly lower. It is mainly used in heavy machinery.
Multi seal double and four row tapered roller bearings, ZWZ provides long-life, multi seal double and four row tapered roller bearings. Carry out personalized new design for bearings, change the traditional design method of fully sealed bearings, and adopt a new sealing structure combining sealing and dust prevention, so as to improve the sealing effect and sealing performance. Compared with open structure bearings, the service life of multi seal double and four row tapered roller bearings is increased by 20% – 40%; Lubricant consumption is reduced by 80%.
Multi seal double and four row tapered roller bearings, ZWZ provides long-life, multi seal double and four row tapered roller bearings. Carry out personalized new design for bearings, change the traditional design method of fully sealed bearings, and adopt a new sealing structure combining sealing and dust prevention, so as to improve the sealing effect and sealing performance. Compared with open structure bearings, the service life of multi seal double and four row tapered roller bearings is increased by 20% – 40%; Lubricant consumption is reduced by 80%.
Structural features:
The type code of tapered roller bearing is 30000, and the tapered roller bearing is a separate bearing.
The angle of the outer ring and the diameter dimension of the outer raceway have been standardized as the same as the overall dimension. It is not allowed to change during design and manufacturing. So that the outer ring and inner components of tapered roller bearings can be interchangeable all over the world.
Tapered roller bearings are mainly used to bear the combined radial and axial loads dominated by radial loads. Compared with angular contact ball bearings, the bearing capacity is large and the limit speed is low. Tapered roller bearing can bear axial load in one direction and limit axial displacement of shaft or housing in one direction.
The type code of tapered roller bearing is 30000, and the tapered roller bearing is a separate bearing.
The angle of the outer ring and the diameter dimension of the outer raceway have been standardized as the same as the overall dimension. It is not allowed to change during design and manufacturing. So that the outer ring and inner components of tapered roller bearings can be interchangeable all over the world.
Tapered roller bearings are mainly used to bear the combined radial and axial loads dominated by radial loads. Compared with angular contact ball bearings, the bearing capacity is large and the limit speed is low. Tapered roller bearing can bear axial load in one direction and limit axial displacement of shaft or housing in one direction.
Tapping machine bearing Application：
Tapered roller bearings are widely used in machine tool spindles, gear reducers, automotive drive axles, transmissions, rolling mills, mines, metallurgical industries, plastic machinery, household appliances, motors, pumps, machinery and other automotive parts.
Tapping machine bearing Feature:
1. High load carrying capacity
The large number of rollers, which have an optimum conformity with the washer raceways, enables the bearings to accommodate heavy axial and simultaneously acting radial loads.
2. Accommodate misalignment
Tapered roller bearings are self-aligning and can accommodate misalignment .
3. Separable design
Tapered roller bearings are separable, making it possible to mount and dismount the housing washer separately from the shaft washer and roller and cage assembly. In addition this facilitates maintenance inspections.
4. High speed capability
The cage designs and the optimum conformity of the rollers with the washer raceways make the bearings suitable for relatively high speeds.
5. Long service life
The tapered roller profile reduces edge stresses at the roller/raceway contact.
6. Low friction
The optimized roller end / flange contact keeps frictional heat at low level, even at high speeds.
评价
目前还没有评价