UCFC208 pillow block bearing

UCFC208 pillow block bearing its basic performance and deep groove ball bearing should be similar, but because this bearing is mostly used in relatively rough machinery, the installation positioning is not accurate enough, the axis of the shaft and the seat hole is neutral, or the shaft is long and the deflection is large, and the accuracy of the bearing itself is not high enough. Some structures are also relatively rough, so the actual performance of the same specifications of deep groove ball bearings to play a considerable discount. For example, the outer spherical ball bearing with the top wire is applied to the through shaft with a large stiffness difference and deflection. The bearing has sealing rings on both sides to strictly prevent the intrusion of dirt. It has been filled when leaving the factory
Appropriate amount of lubricant, no need to clean before installation, no need to add lubricant, when the top screw on the convex end of the bearing inner ring is fastened on the shaft. The allowable axial load shall not exceed 20% of the rated dynamic load